electrical socket tester check plug socket tester from China manufacturer

electrical socket tester check plug socket tester

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: SLT-3

Switch And Plug - Socket Life Testing Apparatus

Switch And Plug - Socket Life Testing Apparatus

Product overview:

This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test of breaking volume of plug and socket, and mechanical action of normal operation lifespan. The testing purpose is to see whether the switches or the plugs and sockets can endurance the mechanical damage or electric fatigue failure during the normal operation. Whether the contact adhesion occurs or there is a phenomena of being the on (off) station for a long time, which is the criterion of judging the sample is over damage or not.

The equipment is suitable for the rated current less than 32A push-button switch, toggle switch, rocker switch, push-pull switches and knobs switches. It can also be used for load test when connected with the load box.

The device is made of aluminum alloy rack, stainless steel seal plate, driven by a servo motor and ball screw, 7-inch multicolor touch-screen display and set the test parameters, PLC control. The testing times, the connecting time, testing rate, and the rotating angle can be preset. With the current displayed, the equipment can display the current sample. There are six working stations. Three are for linear switch test or plug and socket test and three for rotary switch test. When the switch consecutive turned on or off due to adhesion or failure, it can fault alarm and record the number of experiments. When an alarm occurs, the test is stopped automatically.

Specifications:

1	Power supply	AC220V±10%/50Hz
2	Working station	6 stations,three for linear switch and three for rotary switch
3	Operation interface	7-inch multicolor touch screen
4	Type of drive	Servo motor +ball screw
5	Controlling system	PLC control
6	Testing times	0999999,it can be preset.
7	Connecting time	099.9s,it can be preset.
8	Closing time	099.9s,it can be preset.
9	Testing scope	Linear:-40110mm,it can be preset. Rotary: 0360°,it can be preset.
10	Testing speed	Linear:0100mm/s,it can be preset. Rotary: 090°/s,it can be preset.
11	Atmospheric pressure	80106kpa
12	The temperature of environment	540°C
13	Relative humidity	(2090)%RH
14	Using place	No violent shaking Without electromagnetic interference and dust. No explosive or corrosive gas. Good heat dissipation
15	Size and weight	LWH=880730520mm,120kg